magicolor 330 - Base Engine Service Manual 9-45
Removal and Replacement Procedures
RRP 9.20 Turn IN Chute (PL3.1.18)
Removal
1. Remove the Main Paper Handling Assembly (RRP 9.36).
2. Press the rear pivot arm of the Turn IN Chute away from the printer frame and remove the ar m from
the pivot hole in the rear of the printer frame.
3. Slide the Turn IN Chute to the rear of the printer and free the front pivot arm from the pivot hol e in the
front of the printer frame.
Replacement
1. Insert the front pivot arm of th e Turn IN Chute into the pivot hole in the front of the printer frame.
2. Press the rear pivot arm of the Turn IN Chute and insert the rear pivot ar m into the pivot hole in the
rear of the printer frame.
3. Reinstall the Main Paper Handling Assembly (RRP 9.36).