magicolor 330 - Base Engine Service Manual 9-233
Removal and Replacement Procedures
RRP 9.114 Rotary Motor Assembly (PL11.1.20)
Removal
1. Remove the Rear Cover (RRP 9.4).
2. Disconnect P/J 247 fro m the Rotary Motor PWB.
3. Remove the three screws securing the Rotary Motor Assembly to the printer frame and remove the
Motor.
Replacement
1. Position the Rotary Motor Asse mbly so the wires are at the top.
2. Reinstall the Rotary Motor Assembly onto the printer frame, r epositioning the Motor so the two posi-
tioning tabs on the Motor fit into the two positioning holes in the frame.
3. Use three screws, top right, bottom right, and bottom left, to s ecure the Rotary Motor Assembly to the
printer frame.
4. Reconnect P/J 247 to the Rotary Mot or PWB.
5. Reinstall the Rear Cover (RRP 9.4).