magicolor 330 - Base Engine Service Manual 9-79
Removal and Replacement Procedures
RRP 9.37 Paper Handling Turn Chute Assembly (PL5.1.4)
Removal
1. Remove the MSI Assembly (RRP 9.22).
2. Remove the two screws securing the Main Paper Hand ling Cover to the Main Paper Handling Assem-
bly and remove the Cover.
3. Remove the Pre-Registration Chu te Assembly (RRP 9.38).
4. Pry free the front and rear piv ot arms located at the bottom of the Paper Handling Turn Chute Assem-
bly and lift up on the bottom of the Chute Assembly.
5. Pry free the front and rear pivot ar ms located at the top of the Paper Handling Turn Chute Assembly
and remove the Chute Assembly from the Main Paper Handling Assembly.
Replacement
1. Insert the front and rear pivot arms located at the top of the Paper Handl ing Turn Chute Assembly into
the holes at the top of the Main Paper Handling Assembly.
2. Swing the Paper Handling Turn Chute Assembly down i nto position and insert the front and rear pivot
arms located at the bottom of the Paper Handling Turn Chute Assembly into the holes at the bottom of
the Main Paper Handling Assembly.
3. Reinstall the Pre-Regist ration Chute Assembly (RRP 9.38).
4. Reinstall the Main Pape r Handling Cover onto the Main Paper Handling Assembly and use two screws
to secure the Cover to the Assembly.
5. Reinstall the MSI Asse mbly (RRP 9.22).