Telephone user interface 143
While the system is announcing the list of conference participants after the chairperson enters *69, the chairperson can execute the commands in Table 35.
Table 35
Chairperson commands during count command
Chairperson dials ... | In order to ... |
|
|
# | Stop and start the playlist. |
|
|
0 | Consult privately with the conferee. |
|
|
1 | Mute/unmute the conferee. |
|
|
2 | Play the current conferee name greeting. |
|
|
*3 | Return to the conference. |
|
|
4 | Select the previous conferee and play name. |
|
|
6 | Select the next conferee and play name. |
|
|
9 | Disconnect the current conferee. |
|
|
** | Start and stop the help menu. |
|
|
Features available to all participants
Self mute/unmute toggle
All conference participants, including the chairperson, can put themselves on mute by dialing *19. While on mute, the participant can listen to the conference. To unmute, the participant dials *19 again. Because there is one command for mute and unmute, the system announces to the participant one of two possible voice messages: “Muted” or “Unmuted.” Only the participant that activates the command hears the mute/unmute announcement. The mute/unmute command is available to those participants who dial into the conference and who the chairperson brings into the conference using the
Stop or start music
This feature stops or starts the initial conference music, which is possible only when the conferee is the first person joining the conference. Dial *99. The first entry stops it, the second entry starts it.
Nortel Integrated Conference Bridge Service Implementation Guide
