Nortel Networks 553-3001-358, 555-4001-135 manual ICB hardware list, Component Description

24Product description

•provides self-tests of internal hardware components and allows card monitoring and maintenance through the maintenance port; provides enable/disable capabilities similar to existing Meridian cards

•provides one RS-232 serial port for administration and maintenance access

•provides enhanced Call Detail Recording (CDR – Meridian 1 only) and billing options

•provides an optional Ethernet interface over a Maintenance interface

•provides a Command Line Interface (CLI) accessible by direct connection, modem, telnet, or BUI emulation for performing OA&M functions

•enables the reservation of one port on each card for TUI-only interaction

•provides an embedded web-based server

•provides a customized ICB BUI login window

•offers automatic backup. Backup configurations can be e-mailed to a predefined e-mail address

Table 1 describes each hardware component of the ICB application. These components connect the ICB to the local or remote maintenance terminal.

Table 1

ICB hardware list

Component	Description
NT5D51BC or higher	An IPE card that provides bridge and conference scheduling for up to 10
ICB card	simultaneous conferences.
NT5D62FA or later	This PCMCIA card contains the ICB software and configuration. Install the
PCMCIA hard drive	PCMCIA card in the lower PCMCIA drive.
card
NT5D52 Ethernet	Install this adapter card to provide Ethernet connection for the ICB.
Adapter card	Note 1: NT5D52BC for CS 1000, CS 1000M, Meridian Option 11C, and Meridian
	SL-100.
	Note 2: NT5D52CA is used for Meridian Options 51-81C.

Note: Caution - You may need the NTCW84JA I/O Panel Filter Connector for a large system. See “Installing the NTCW84JA I/O Panel Filter Connector for a Large System” on page 47 for more information.

553-3001-358/555-4001-135 Standard 02.00 July 2006