Nortel Networks 553-3001-358, 555-4001-135 - page 56

56 Installation and configuration
553-3001-358/555-4001-135 Standard 02.00 July 2006
Figure 11
Single-card conference, 10 conferences, 32 ports
Configuration procedure
Single-card installation enables up to 10 conferences on one 32-port
ICB card. Each ICB card can use one ICB ACD Group to handle all the
access DNs required.
To configure an ICB single-card conference with direct meeting access,
from a maintenance and administration position (MAP) terminal follow
the steps in Procedure 2.
Procedure 2
Configure a single-card conference
1Define LENs as FLXA (MSL09 or above) in table LNINV for a 32-port
conference. Refer to Figure 12 on page 57.
2Define the ICB ACDGRP and ACD agents assigned to the ICB card. See
Figure 13 on page 57, Figure 14 on page 58, and Figure 15 on page 58.
G100016
ICB Card
Table DNROUTE
ICB
997-1400
Table OFRT
601 997-1400
Table DNROUTE
ICB
997-1400 (Main ACD DN to route to ACD agents)
997-1601 to 997-1610 (setup for up to 10 ICB conferences)
997-1701 to 997-1910 (setup for up to 10 ICB chairpersons)
997-1800 (setup for single access ICB conference call)
997-1900 (setup for single access ICB conference call)
32 ACD
agents
assigned to
ICB
ACDGRP