Maintenance 179

To modify a value or attribute of an object, the program responds with a sequence of prompts: one prompt for each attribute of the object. The prompt defines the name and the current value of the attribute. You can change the value, accept the current value, or cancel the modification as follows:

attribute_a (current_value_a): new_value_a <cr>

attribute_b (current_value_b): <cr>

attribute_c (current_value_c): .

The system can display the current value and a list of available values to select. In the following example, the value of attribute_d changes to bbbb:

attribute_d (current_d, (1-aaaa, 2-bbbb, 3-cccc)): 2

When executing the command(s), the program provides the option to modify, save, or cancel the changes. When Save is entered, the system accepts the changes. After the session ends, use the commands in Table 43 on page 178 to navigate through the menus.

ICB CLI commands

Table 46 shows ICB-specific CLI commands.

Table 46

ICB CLI command summary

Menu and command

Items and commands

 

 

System administration:

System Attributes Editor: SY

SA

Use the System Attributes Editor for initial card configuration (see

 

Procedure 13 on page 71) and to define the following:

 

card name – up to 10 characters; appears in top of the initial window

 

 

if specified.

 

refresh period – time between updates to CLI window when not in

 

 

use, from 0 to 60 minutes (default is 5 minutes). 0 disables system

 

 

status display.

 

short occupancy – detects short connection time of an ICB port.

 

 

Connection times less than the threshold can indicate a bad

 

 

connection of incorrect DN dialed. When this occurs, the system

 

 

increments a counter. When the system checks counters, it displays

 

 

those with peg counts as potential problems.

 

subnet mask – the subnet mask of the ICB

 

gateway IP address – the gateway IP address of the ICB

 

IP address – the IP address of the ICB

 

disconnect lone participant – time before system disconnects a single

 

 

participant in a conference (default is 30 minutes).

 

 

 

Nortel Integrated Conference Bridge Service Implementation Guide

Page 179
Image 179
Nortel Networks 555-4001-135, 553-3001-358 ICB CLI commands, ICB CLI command summary, Menu and command Items and commands