72 Installation and configuration

where XXX is in the range 0-255. Subnet mask in binary presentation of 32 bits has at least the first eight digits “1” and the last digit is “0”.

Gateway address – Is in the XXX.XXX.XXX.XXX format, where every token is in the range 0-255.

8Enter S to save the parameters.

9Exit the CLI and proceed to Procedure 14. All other card configuration is performed from the BUI.

This procedure is now complete

Procedure 14

Access the administration BUI

1Check the installation by doing the following:

a Run a browser, either Netscape or Microsoft Internet Explorer. b In the location field, enter:

http://<ICB IP address>

cLogin as an administrator. The default ID and password are admin and carriage return (enter key).

dProceed with the installation using the Installation Wizard (see below).

This procedure is now complete

ICB Installation Wizard

Overview

The ICB Installation Wizard provides an easy method for configuring new systems. Only a user who logs in as an administrator can use the Installation Wizard. An administrator accesses the Installation Wizard by clicking on the Install Wizard link on the BUI’s ICB Dashboard. For more information about accessing this tool, see, “Administration BUI” on page 105.

After completing a Wizard session, the administrator can try operating the card (that is, schedule a conference and place a call), so long as the Meridian system setup is complete. An administrator can return to the Wizard at any time to change system definitions.

553-3001-358/555-4001-135 Standard 02.00 July 2006

Page 72
Image 72
Nortel Networks 553-3001-358, 555-4001-135 manual ICB Installation Wizard, Procedure Access the administration BUI, Overview