180 Maintenance
Table 46
ICB CLI command summary (Continued)
Menu and command | Items and commands |
|
|
System Maintenance: | System Test: ST |
SM | To perform system component tests enter: |
| • i – perform |
| • o – perform |
| Maintenance Report Browser: MR |
| Browse maintenance reports by date. For more information, see “CLI |
| Maintenance (Error) Report” on page 210. |
| Ping Test: |
| Enter a computer’s IP address to test IP connectivity with this computer. |
| Short Connection Report: SC |
| Browse short connection reports by date (see “CLI Short Connection |
| Report” on page 197). |
| Database Archive: AR |
| Backup the customer database (see “Backup” on page 134). |
| Database Restore: RE |
| Restore the customer database (see “Restore” on page 192). |
| Card Restart: CR |
| Restarts ICB card and begins software reload. |
| Message Analysis Tool: SHO |
| Prints information about an error message that is entered (see “Error |
| message procedures” on page 184). |
| Message Filtering: ERR |
| Enables the filtering of error messages (see “Configure error message |
| filtering” on page 186). |
| Data Conversion: CONVERT |
| Copies the data from the upper PCMCIA, converts to ICB Release 4 |
| format, and stores it in the lower PCMCIA. |
|
|
Protected administration: | Password Editor: PS |
PA | Edit passwords (see “Appendix A: Password security” on page 223). |
| Functionality Upgrade: FU |
| Performs a functionality upgrade. |
| The system prompts for the number of ports and for the keycode that must |
| be entered in three rows of eight characters each. The system will then |
| prompt for which feature (can be either advanced or basic). |
| Software Upgrade: SW |
| Performs a software upgrade. |
| The system first prompts for the source: upper socket or FTP. If FTP is |
| entered, the system then prompts for IP address, path to file, login, and |
| password. |
| Administrator BUI Reset: AB |
| Reset passwords to the default (that is, 000000) of all administrators that |
| use the BUI. |
|
|
