Installation and configuration 63
Nortel Integrated Conference Bridge Service Implementation Guide
Figure 24
DNROUTE example
Use table ACDRTE to allow a dual-card conference to overflow from
ICB card 1 to ICB card 2 when there are no more available ports on card
1.
Figure 25
ACDRTE example
Use table OFRT to add the DN routing for the second ICB card.
Figure 26
OFRT example
Configuration procedure
To set up a dual-card configuration using direct meeting access, follow
the steps in Procedure 3 on page 64.
AREACODE OFCCODE STNCODE DNRESULT
------------------------------------------------------------------
214 997 1600 FEAT ACD MICB2 PRIM 0 0
214 997 1401 FEAT ACD MICB1 SUPP 0 (Used for Dual Card MAIN Conference)
214 997 1402 FEAT ACD MICB1 SUPP 0 (Used for Dual Card Card 1 chairperson)
214 997 1403 FEAT ACD MICB2 SUPP 0 (Used for Dual Card Card 2 chairperson)
214 997 1404 FEAT ACD MICB2 SUPP 0 (Used for Dual Card Transfer DN)
214 997 1405 FEAT ACD MICB2 SUPP 0 (Used for Dual Card Link DN)
214 997 1802 FEAT ACD MICB2 SUPP 0 (Used for single card conferences)
214 997 1803 FEAT ACD MICB2 SUPP 0 (Used for single card conferences)
.......cont until # of ports needed are configured
Note: The DNs in bold are only required when using single access DNs.
ACDGRP OPTNAME OPTION
MICB1 OVFL OVFL (MICB 2)
RTE RTELIST
---------------------
601 (RT 214 NP LCL 9971600 Y N $) $