Nortel Networks 553-3001-358, 555-4001-135 Group Settings Retry parameters, Field Description

126 Browser user interface

Table 30

Group Members table columns (Continued)

Column		Description
Checkboxes		Click on a check box to select a member of the group. The Delete button at the
		bottom of the window can then be used to delete the group member. Before
		deleting the group, the system displays the following dialog box, for example:
		“Are you sure you want to delete these five members?”
	Use the Add Members button at the top of the Group Members table
	to add a member to the group (see Figure 66 on page 127).
	The right side of the window displays the group’s properties for
	outcalling retries. These settings apply only to members with the option
	“Wait for Confirmation” activated. Table 31 describes these parameters
	which are view only. Click on the Modify button to open a window in
	which these settings can be changed (see Figure 68 on page 129).

Table 31

Group Settings Retry parameters

Field	Description
Wait time for	The number of seconds to wait for the called party to answer when calling
answer	numbers in this group.Time is measured from call origination, so it includes the
	dialing and ringing stages. An answer here, refers to the DTMF * keypad press.
	Range: 15-90 seconds.
	Default: 30 seconds.
Number of call	The number of times to try each number in case of failure. Value 1 means only
attempts	1 attempt, no retries.
	Range: 1-3.
	Default: 1.
Time interval	The number of seconds the system waits, before retrying the same number.
between attempts	Range: 5-30 seconds.
	Default: 10.

Add Members – Click on the Add Members button in the Call-Out Groups Details window to open the Add Members window. Use the Add Members window to add one or more members to an existing group (see Figure 66 on page 127).

553-3001-358/555-4001-135 Standard 02.00 July 2006