228 Appendix A: Password security

cWait for the following banner to appear:

********************************************

************************

*

Running MAIN CODE!!!

*

dEnter the token default. This token must be entered within 15 seconds of the banner’s appearance.

The restart process continues and more lines of text may appear.

eWhen the power-up process completes and the CLI is ready for input, enter the factory-default second level password (that is, login = debug; password = no password).

fAccess the password editing command to display or modify the CLI name and password (see Procedure 54).

After logging out from the CLI, normal login resumes.

This procedure is now complete

Follow the steps in Procedure 54 to edit or view a password from the second level of the CLI.

Procedure 54

Use the second-level CLI edit password command

1Enter the second-level login name and password.

2Enter PA Admin (or pa).

The CLI displays a list of available commands.

3Enter the following command: PSweditor (or ps).

The ICB displays passwords and related parameters and prompts for values. The system groups the parameters by sections, to allow faster steps. The sections are: [MIN_LENGTH], [CLI], [TELNET], [FTP], and [BUI}.

This procedure is now complete

553-3001-358/555-4001-135 Standard 02.00 July 2006

Page 228
Image 228
Nortel Networks 553-3001-358, 555-4001-135 manual Procedure Use the second-level CLI edit password command