Nortel Networks 553-3001-358, 555-4001-135 manual Procedure Access the ICB remotely using a modem

68 Installation and configuration

4Plug the DB-25 male connector at the other end of the terminal cable into the RS-232 connector on the terminal. A nullmodem is not required. If a gender changer is required, purchase one from a local electronics store.

This procedure is now complete

Procedure 6

Access the ICB remotely using a modem

1Verify that the Ethernet Adapter card is on the I/O panel as described in Procedure 4 on page 66.

2Plug the terminal cable DB-9 female connector into the DB-9 male connector on the Ethernet Adapter card on the I/O panel.

3Plug the DB-25 male connector at the other end of the terminal cable into the DB-25 female connector of a DB-25F/DB-25M nullmodem adapter. If a female-to-female nullmodem is required, use a customer-supplied nullmodem.

4Plug the DB-25 male connector of the nullmodem adapter DB-25F/DB-25M into the DB-25 female connector on the modem. If a female-to-female nullmodem is required, use a customer-supplied nullmodem.

5Plug the modular modem cable RJ11 plug into the RJ11 jack on the modem.

6Plug the other end of the modular modem cable RJ11 plug into the RJ11 jack on the wall.

This procedure is now complete

Procedure 7

Access the ICB remotely using a LAN hub

1Verify that the Ethernet Adapter card is on the I/O panel as described in Procedure 4 on page 66.

2Plug the modular cable RJ-45 plug into the RJ-45 jack on the NT5D52AC Ethernet Adapter card.

3Plug the RJ-45 plug at the other end of the modular cable into the Ethernet LAN hub.

4Make the remaining Ethernet connections as required using standard Ethernet connection rules.

Note: For local testing purposes, or direct connection from the Ethernet port to a PC, use an Ethernet cross-over cable purchased at a local computer store.

This procedure is now complete

If installing the ICB card in an Option 11C or CS 1000, use the following procedures to connect the Maintenance terminal.

Note: These procedures do not apply to the Meridian 1 Options 51C, 61C or 81C or the CS 2100/Meridian SL-100.

553-3001-358/555-4001-135 Standard 02.00 July 2006