Polycom RMX 1000 manual 11-9, 6Description of Port Settings, Fixed Ports, TCP/UDP Ports from

Polycom RMX 1000 User Guide

The table below explains the detailed meanings of these parameters.

Table 11-6Description of Port Settings

Parameter

Description

	Specifies whether to define the TCP and UDP ports.
	ƒ Leave this check box clear if you are defining a Network
	Service for local calls that does not require configuring a
Fixed Ports	firewall to accept calls from external entities. When this
	option is not selected, the system uses the default port
	range.
	ƒ If the firewall is incompatible with H.323, enable this
	setting and specify the TCP and UDP port ranges.
	Shows the default TCP/ UDP port range. The user can set
TCP/UDP Ports from	the start port number here, and the end port number will be
	calculated automatically.

If the network administrator does not specify an adequate port range, the system will accept the settings and issue a warning. Calls will be rejected when the MCU’s ports are exceeded even if hardware ports are still available on the RMX 1000.

Email

Users can set the address and account information for outgoing conference notification Emails. In the IP Network Services interface, click Email to configure the Email information.

Figure 11-8IP Network Services – Email

Table 11-7Description of Email Settings

Parameter

Description

Email Address	Set the Email address for outgoing Email messages.
SMTP Address	Set the mailbox server address for outgoing Email
	messages.

11-9