Polycom 3150-16966-002, RMX 1000 manual Configuring Directory Service, GAB Server

Chapter 8 – Address Book

3Select or enter the path where the address book file (.csv) to be uploaded is located, and then click Open to return to the interface for importing the address book.

4Click Upload.

When uploading an address book file, conflicting participant addresses will not be overwritten.

Directory Service

If the RMX 1000 system is successfully integrated with a directory server, the list of participants in the directory server will become the RMX 1000 address book.

Configuring Directory Service

In the Web interface, click the Setup->Directory Service menu item at the upper left part to enter the Directory Service interface.

The RMX1000 supports the GAB and LDAP directory service modes. Select the mode supported by the directory server that is provided by your local network. None is selected by default, indicating that directory service is not used. Depending on different directory service modes selected from Type by users, the system requires configuring different parameters.

GAB Server

To register RMX 1000 to the GAB server, select GAB from Type.

Figure 8-7Directory Service - GAB

Configure parameters in accordance with the table below:

Table 8-3GAB Configuration Parameters

Parameter

Description

Server	Set the IP address of GAB server.
Password	Enter the password (if available) of global directory.

8-8