
Polycom RMX 1000 User Guide
LDAP Server
To register RMX 1000 to the LDAP server, select LDAP from Type.
Figure 8-8 Directory Service - LDAP
Configure parameters in accordance with the table below:
Table 8-4 LDAP Configuration Parameters
Parameter
Description
Server | IP address of the LDAP directory server | |
|
| |
Server Port | LDAP server port No. | |
|
| |
Base Distinguished | LDAP Base DN | |
Name (DN) | ||
| ||
|
| |
| LDAP authentication type. Depending on different | |
Authentication Type | authentication types selected by users, the system | |
| requires configuring different options. | |
|
| |
Use Secure Socket | Specify whether to use SSL secure transmission or not. | |
Layer (SSL) | ||
| ||
|
| |
Domain Name | LDAP server domain name | |
|
| |
Bind Distinguished | LDAP bind DN | |
Name (DN) | ||
| ||
|
| |
User Name | User name of the LDAP directory | |
|
| |
Password | Enter the password (if available) of LDAP directory. | |
|
|
After the configuration is finished, | will be displayed if the directory |
service is successfully registered, or else | is displayed. |