Polycom RMX 1000 User Guide

View Device Information

Enter show after the prompt # to view the current device information, including the system information, license information, interface information and IP address.

Idle Timeout Setting

Enter keepalive<timeout> after the prompt # to modify the keep-live timeout setting. If no operation was executed in the defined time interval, the device will time out and exit.

Table 18-1Parameters Description

Parameter Description

timeout

Defaults to 120 seconds and can be modified to any value in the range of 5 – 600 seconds

[Example] Set the timeout time to 60 seconds:

Reboot Device

Enter reboot after the prompt # to reboot the device.

Restore Password

Enter reset password after the prompt "#" to restore the user password for Web login to the default passwordPOLYCOM. The system will display the prompt “Are you sure?”, Enter “Y” to continue, or enter “N” to cancel.

After resetting the password, the RMX 1000 must be restarted in order for the new settings to take effect.

[Example] Restore the Web login password to the default configuration:

Restore System Configuration

Enter reset config after the prompt "#" to restore the system to the default configuration. The system will display the prompt “Are you sure?”, Enter “Y” to continue, or enter “N” to cancel.

18-3

Page 158
Image 158
Polycom RMX 1000, 3150-16966-002 manual View Device Information, Idle Timeout Setting, Reboot Device, Restore Password