Polycom RMX 1000 Advanced Setting, 2Configuration Description of New Participants Advanced, Mail

Polycom RMX 1000 User Guide

Figure 8-4Cascading Configuration – RMX 1000_2

Advanced Setting

Usually, you only need to set the parameters on the General tab, and accept other default settings of the system. To set advanced parameters, click the Advanced tab.

Figure 8-5New Participants - Advanced

The table below explains the configuration parameters.

Table 8-2Configuration Description of New Participants – Advanced

Parameter	Description
	Specify the line rate of the participant’s endpoint. Auto
Line rate	indicates using the line rate specified by the RMX 1000
	system.
	Move the corresponding slider to adjust the volume
Broadcast / Listen	transmitted/received by the participant. Each grid increases or
Volume	decreases the sound by 3dB. The adjustable range is 1~10 (in
	the ascending order), while the default value is 5dB.
	Set the Email address used by the participant to receive
E-Mail	conference notices from the system. Up to 2 Email addresses
	can be set by separating them with a “;”. For example, enter
	address1@polycom.com; address2@polycom.com.

8-5