Chapter 16 – Personal Conference Manager (PCM)
Introduction to PCM Interfaces
Viewing the PCM Interface
To establish a call link, use the endpoint to call the IP address for RMX 1000 directly, or call the E.164 prefix or SIP URL of RMX 1000 if you have registered to a gatekeeper or SIM server. After the connection is successfully established, the PCM lobby of RMX 1000 will be displayed on the endpoint, as shown below.
Function
Options
Cursor
Ongoing
Conference
List
Status icon of the selected conference
ID of Highlighted Conference
Figure 16-1 Interface of the PCM Lobby
Table 16-1 Description for Conference States
Status
Description
No participant joins the highlighted conference, and an endpoint can directly access it.
Some participants have joined the highlighted conference, and an endpoint can directly access it.
The highlighted conference has a password. You must enter the conference password to join it.
The highlighted conference is locked and permits nobody to join.
The highlighted conference has a password. You cannot joint it through the PCM interface.
The current endpoint is unavailable in the participant list of the conference, and this conference is configured with Only participants in the above participant list can dial in (see Participant setup).
