Polycom RMX 1000 manual Control Operations, Setting Conference Layout for Participant’s Endpoint

Polycom RMX 1000 User Guide

Button	Name		Description
			Suspend the video transmission from the participant to
			the conference. The suppressed participant’s video is
	Suspend Video		not transmitted to the conference but the participant still
			receives conference video. The Suspend Video
			indicator appears in the participant list and the Resume
			Video button becomes active ( ).
			Participant’s video transmission to the conference
	Resume Video		resumes. The Suspend Video button becomes active
		(		).
			To block the audio transmission from the conference to
			the participant. When blocked, the participant can still
	Block Audio		be heard by the conference. The Audio Blocked
			indicator appears in the Participants List and the
			Unblock Audio button becomes active ( ).
			Conference audio transmission to the participant
	Unblock Audio		resumes. The Block Audio button becomes active
		(		).
	Add Participant		Open the address book, and then select the desired
	to Address		participants. For more information about the address
	Book		book, see Address Book.
	Start Recording		Start conference recording.
	Pause		Stop conference recording temporarily.
	Recording
	Stop Recording		Terminate conference recording.

In the participant list, right-click any connected participant to display the shortcut menu. Through this shortcut menu, you can conduct common participant control operations. If you right click an unconnected but defined participant, the shortcut menu only provides some of the above operations.

Control Operations

Setting Conference Layout for Participant’s Endpoint

If the layout mode is set to Conference Layout on the conference parameter interface, you can customize the layout of each participant’s endpoint at the Web interface.

To define the screen layout of each participant:

1In the participant list, double-click the participant to be defined, or right-click this participant, and then click Participant Properties to enter the participant parameter interface.

2Click the Video Settings tab, and then select Personal from Layout Type.

3Set layout for the endpoint. The procedure for setting layout here for the endpoint is similar to that for setting conference layout. For more information, see Changing Conference layout.

9-9