Polycom RMX 1000, 3150-16966-002 Configuring Other Network Options Optional, LAN Speed, MTU Size

	Polycom RMX 1000 User Guide
Parameter	Description
	Sets the speed/duplex modes for LAN ports. Supported
	speed/duplex modes include 10/100M, Full Duplex or Half
	Duplex, and the 1000M Network mode. You can also
LAN Speed	select Auto to use Auto-Negotiation with the switch port.
	Note: Contact the network administrator before setting LAN
	Speed, to ensure that the switch configuration is matched
	with the MCU port.
	Specifies the Maximum Transmission Unit (MTU) size
	used in IP calls and Web communications. If the video
MTU Size	becomes blocky or network errors occur, packets may be
	too large; decrease the MTU. If the network is burdened
	with unnecessary overhead, packets may be too small;
	increase the MTU.

Configuring Other Network Options (Optional)

If necessary, you can configure other network parameters according to the following procedure:

1Click the IP Network Services configuration item in the RMX Management pane.

2In the IP Network Services configuration pane, double-click or right-click LAN 1 -> Properties.

3Click the Routers tab, and set the routing table information according to the network topology.

Figure 2-8IP Network Services – Route Settings

Table 2-2Routers Setting

Parameter

Description

Router IP Address

Set the IP address for the sending router of packet transmission.

2-7