Polycom 3150-16966-002, RMX 1000 manual Snmp Setting, Setting the Agent, 14-8

Chapter 14 – RMX Utilities

SNMP Setting

RMX1000 supports the Simple Network Management Protocol (SNMP). You can monitor the MCU status by managing the workstation.

Click the Setup ->SNMP Setting menu item at the upper left part to enter the SNMP Properties interface.

Figure 14-8SNMP Setting Page - Agent

Setting the Agent

Configure the following parameters on the SNMP Properties -> Agent interface:

Table 14-5Parameter Configuration of SNMP Agent

Parameter

Description

	With this option selected, the administrator is allowed to
SNMP Enabled	manage the RMX 1000 system with SNMP from a far end.
	Only after the SNMP function is enabled, can you configure
	the following parameters.
Retrieve MIB Files	You can export MIB files by clicking this button.
Contact person for	Specifies the name of the person who manages this MCU
this MCU	from a far end
MCU Location	Specifies the location of MCU
MCU System	Specifies the system name of MCU
Name
	Specifies the SNMP agent version used by MCU
	ƒ Version 1 and Version 2 - When this option is selected, you
SNMP Agent	need to configure Community Name.
	ƒ Version 3 - Specifies the parameter settings of secure and
Version
	remote configuration; when this option is selected, you need
	to configure User Name, Security Level and related
	options.

14-8