Polycom RMX 1000 User Guide
The table below explains the detailed meanings of these parameters.
Table 5-2 Parameter Description for Recording Link - DTMF Codes
Parameter
Description
Name | Name of the recording operation | |
|
| |
| Set the remote control key combination used to perform the | |
| operation. The default numbers can be customized. For | |
| example, the default DTMF code for the Start Recording | |
DTMF Code | command is *2, you can press the keys *2 to start conference | |
| recording. | |
| Note: Before using the DTMF command, enable the DTMF | |
| function of the endpoint according to that endpoint's instructions. | |
|
| |
| Set the rights of using DTMF codes. Chairperson indicates that | |
Permissions | the DTMF is available to the conference chairperson only; | |
Everyone indicates that the DTMF is available to all | ||
| ||
| participants. | |
|
|
Recording Control
When a conference is going on, you can view and control the status of the configured recording link. In the Conferences list pane, select the desired conference. Then the list pane located on the right side shows the defined participants and connected participants, among which the recording link is
indicated by the 
icon.
Figure 5-4 Recording Control
When a conference is going on, you can perform the following recording control operations through the recording buttons in the list pane or the
•
- Start recording
•
- Pause recording
•
- Stop recording
•The conference chairperson can also control recording in the PCM interface. For details, see Recording a Conference.
•For more information about the recording control operations of the RSS 2000, see RSS 2000 User Guide.
