Polycom RMX 1000, 3150-16966-002 manual Video Settings, Defining Content Video Quality

Polycom RMX 1000 User Guide

and the conference video can be displayed with the best HD resolution of 1280x720 (720p). However, all the endpoints must support the H.264 protocol and 720p resolution, and the bandwidth cannot be lower than 832Kbps, or else the display of conference video will be, depending on the capability of the participant's endpoint, degraded to the resolution of 4CIF or CIF, or H.263 code.

The RMX supports a maximum of 20 video resources and 20 audio resources. The number of connection resources supported by the device in the actual conference depends on the number of resources purchased by the user.

Defining Content Video Quality

When the endpoint sends dual streams, the RMX 1000 system applies different encoding and decoding policies to the people video stream and content video stream. See the table below, which provides the video parameters for setting the second channel of content image.

Table 4-8Video Quality Parameters – Second-channel Video Dual-stream Definition

Parameter

Description

	Set the video protocol used for the dual-stream video. You can
	select the H.264 or H.263 coding/decoding algorithm based on
	the endpoint capability and network bandwidth. When None is
Content Setting	selected, it indicates dual streams are not enabled.
	Note: If this setting is H.264, when an endpoint that only
	supports H.263 protocol joins in the conference, an H.264
	endpoint that originally sent dual streams will terminate sending
	dual streams and resend them using the H.263 protocol.
	The H.239 protocol is used to send dual streams. You can
	select three kinds of video quality as needed:
H.239 Setting	ƒ Graphics: For the standard video display
	ƒ High-resolution graphics: For the graphic detail display of high
	quality broader bandwidth is required.
	ƒ Live Video: For full-motion of dynamic video display. The
	broadest bandwidth is required.
	When this option is enabled, legacy endpoints that do not
	support the H.239 protocol will still be able to view Content in
Send Content to	the conference. However, the Content video will be sent to
	these endpoints instead of the People video when Content is
Legacy
	introduced to the conference. Legacy endpoints will not be able
Endpoints
	to share content – they will only be able to view. Modern
	endpoints which support H.239 will continue to view dual
	streams (People and Content simultaneously) and be able to
	share content.

Video Settings

To set the screen layout of conference on the endpoint screen, click the Video Settings tab on the New Profile interface.

4-7