Chapter 5 – Recording Link

Right-click the default empty link or configured RSS IP address in the interface, and then click Properties to display the Recording Link -> General interface.

General Settings

Figure 5-2Recording Link - General

The table below explains the detailed meanings of these parameters.

Table 5-1Parameter Description for Recording Link - General

Parameter

Description

RSS 2000 IP

Enter the IP address of the RSS 2000 to be connected. This item

Address

is optional if an alias is set in the Alias check box below.

 

 

 

Enter the E.164 number or H.323 alias of the RSS 2000 in

 

accordance with the selected alias type. This item is optional if

RSS 2000 Alias

the IP address of the RSS 2000 is set.

 

Note: If the alias is used for recoding call, both RMX 1000 and

 

RSS 2000 need to be registered to the same gatekeeper.

 

 

Alias Type

Set the alias type of the RSS 2000: H.323 or E.164.

 

 

DTMF Code Setting

To set the recording control operations and rights for use by connected endpoints, click the DTMF Codes tab.

Figure 5-3Recording Link - DTMF Codes

5-2

Page 55
Image 55
Polycom 3150-16966-002, RMX 1000 manual Dtmf Code Setting, 1Parameter Description for Recording Link General, RSS 2000 IP