Configuration
Ethernet IP Configuration
NOTE: Changes to the following settings only take effect upon system reboot:
IP Configuration
CIP Configuration
LANE Configuration Redundancy (APS) Configuration UNI Version Configuration Cause Code changes
ATM Address Changes
On initial setup, configure all of these items before doing a system reboot.
Subnet is the mask for the network. Subnet and Gateway are assigned by your facility’s network administrator. Reboot the Broadmore 1750 to have this IP address take effect. The entire Broadmore 1750 will reboot with the new IP address. Log into the system with a valid user ID and password (ID SYSADMIN, password INITIAL).
1.Enter the IP, subnet, and gateway addresses (obtained from the network administrator). These settings take effect when the Broadmore 1750 is rebooted.
2.Follow the sequence below to reboot on a single CPU system.
Select Maintenance/Diags. ↵
Select Reboot System ↵
3.Log into the system, and return to the system services configuration screen to continue the process.
Broadmore 1750 - Release 4.6 |
