Security Management (FIPS Mode)
System Clock
System Clock
The Broadmore CPU system clock provides the time and date stamp used for system logs, events, and audit trails. A SuperUser must set the system clock either manually after powering up the Broadmore or configure the Broadmore to use a network timing source (see “Network Time Protocol” on page
Select Set System Time from the Administration menu. Then set the Month, Day, Year, Hour, and Minute to the correct values. When finished, press Escape and select Yes to change the system clock.
NOTE: Changing the system clock is an event recorded in the system log (see “System Log” on page
| Broadmore 1750 - Release 4.6 |
