Product Description

Management Interfaces

Physical and Logical Interfaces

The CPU is the entry point for both local and remote network management of the Broadmore. The management interface can be reached either in-band or out-of- band via Telnet or SecureCRT. The CPU module provides a serial port (DB9) for local console access and the CPU IOM provides a 10Base-TX Ethernet port for LAN access. Both interfaces provide full support for out-of-band access to all of the Broadmore management interfaces, depending on the user’s assigned security level.

The embedded software operating system can be accessed via:

Craft terminal or PC using the RS-232 serial or modem interface

IP over ATM protocols: RFC-1577 Classical IP (CLIP) and LAN Emulation Client (LANE) with the Broadmore acting as the LEC

Telnet or SecureCRT via Ethernet or IP over ATM

User Interfaces

There are two principal user interfaces to the Broadmore system management software:

Communication Access Multiplexer Management Interface (CAMMI), a quasi-graphical user interface accessible from a serial terminal and by Telnet or SecureCRT over IP.

Command line interface (CLI) accessible from a serial terminal and by Telnet or SecureCRT over IP.

File Access and Software Upgrades

Data stored on the CPU’s flash disk is protected. In FIPS mode, only a SuperUser can access data files or upgrade the system software. In non-FIPS mode, a SuperUser or SysAdmin can transfer files.

1-6

Broadmore 1750 - Release 4.6

Page 29 Page 31
Page 30
Image 30
Carrier Access 1750 user manual Physical and Logical Interfaces, User Interfaces, File Access and Software Upgrades
Page 29 Page 31
Top Page Image Contents