SNMP Configuration
Views
Views
This selection allows you to create a views and assign object identifiers. The screen below shows the predefined “iso” view.
Select System Management ↵
Select Configuration ↵
Select System Services ↵
Select SNMP Configure ↵
Select Views ↵
Select one of the following:
*Edit ↵, edit the View information
*Copy ↵, (to put a copy of the information into the list)
*Delete ↵, delete an existing View
*New ↵, enter a new View
*Validate Table ↵, check table entries for consistency With each selection, confirm your changes and press Esc to exit.
Broadmore 1750 - Release 4.6 |
