Carrier Access 1750 user manual Port Configuration

Command Line Interface

Port Configuration

Port Configuration

This example shows how to use CLI to configure a DS3 port. Follow the steps below from the initial CLI screen to access the configuration items. The steps shown below must be entered in sequence one-at-a-time. CLI does not support going directly to the last screen via a single entry (e.g., a single entry of sys/config/slot/c/port1/ configoperation/show will give an error for unrecognized entry).

Each parameter can be revised. For example, to change the port name to “DS3Port”, you would enter:

Port name DS3 port

9-6 Broadmore 1750 - Release 4.6