Carrier Access 1750 user manual Network Interfaces, Sanitation Procedures

Security Management (FIPS Mode)

Network Interfaces

Network Interfaces

Network Interface Modules (NIMs) are installed in the Broadmore ATM Multiplexer and provide an interface to the ATM network. Each NIM contains non-volatile Flash memory for storing run-time code. These chips are not physically accessible from the ATM data path and thus cannot store data that passes through the Broadmore.

Sanitation Procedures

The following table summarizes procedures for all Broadmore modules when removing them from authorized areas to open areas.

Product Release	Product Type	Sanitation Procedure
Release 3.8	Broadmore Unit	Power Off for 24 hours
and earlier		Remove Disk-on-Chip from CPU
	Network Interface	Power Off for 24 hours
	Modules
	CPU	Power Off for 24 hours
		Remove Disk-on-Chip from CPU
Release 4.0	Broadmore Unit	FIPS Zeroize Global/Standby
and later		Power Off for 24 hours
	Network Interface	Power Off for 24 hours
	Modules
	CPU	FIPS Zeroize Standby
		Power Off for 24 hours

Broadmore 1750 - Release 4.6 11-51