Carrier Access 1750 user manual SshdShow, Settimeout hhmmss

Security Management (FIPS Mode)

settimeout

DSA Passed

FIPS 186-2 RAND Passed

RSA Passed

SHA1 Passed

IMAGE SIG VERIFY Passed

HMAC-SHA1 Passed

NOTE: If a manually initiated self-test results in a self-test failure, the management module will reboot.

NOTE: A FIPS algorithm self-test failure will immediately disable all management connections, as required by FIPS-2. The Broadmore will continue to carry existing ATM communications traffic across the data plane but the operating configuration can not be changed until the unit is repaired.

settimeout

A SuperUser (Crypto Officer) can set the session timeout for the Broadmore craft port for user inactivity. The command syntax is:

settimeout <hh:mm:ss>

Example: settimeout 00:05:00 will set the timeout to 5 minutes.

Entering settimeout by itself will display the current value.

NOTE: The SSH session timeout is fixed at 5 minutes.

sshdShow

A SuperUser (Crypto Officer) can access the SSHD configuration information, at the Broadmore prompt, by typing sshdShow. An example of the output is provided in the following graphic.

Broadmore 1750 - Release 4.6 11-35