SNMP Configuration

Target Parameters

NOTE: Selecting Validate Table will check that each Parameter Name in this table exists in the Notify Profiles table.

The following table describes the selections.

Item

Options

Comments

 

 

 

Parameter Name

string

Value for Parameter Name, 1 to 30 characters.

 

 

Note: This entry must agree with the Parameters

 

 

Name in the Notify Profiles table (see “Notify

 

 

Profiles” on page 12-42).

 

 

 

User Name

string

Value for User Name, 1 to 30 characters.

 

 

 

Security Model

V1

The Security Model used in processing an SNMP

 

V2

query from a client. This parameter can be used to

 

USM

restrict access to the managed objects based on the

 

 

security model set for a group.

 

 

 

Security Level

None

None – the incoming request requires no

 

AuthnoPriv

authentication or encryption.

 

AuthPriv

AuthnoPriv – authentication is required but SNMP

 

 

messages will not be encrypted.

 

 

AuthPriv – authentication is required and SNMP

 

 

messages are encrypted.

 

 

 

MP Model

V1

Message Processing model

 

V2

 

 

V3

 

 

 

 

Enabled

Enabled

Enables/disables this target parameter.

 

Disabled

 

 

 

 

Storage

Volatile

Settings lost without power.

 

Non-volatile

Settings can be changed.

 

Permanent

Settings can not be deleted.

 

Readonly

Settings can not be changed.

 

Other

 

 

 

 

12-36

Broadmore 1750 - Release 4.6

Page 354
Image 354
Carrier Access user manual Broadmore 1750 Release