SNMP Configuration
Notify Profiles
NOTE: Selecting Validate Table will check that each Parameter Name in this table exists in the Target Parameters table.
The only reason for this table is to allow more than one notify filter with the same Profile Name and different subtree, so that “profile_name” + “subtree” is the key into the Notify Filter table. When a “profile_name” is found in the Notify Profiles table, the Notify Filter table is searched for all entries having the same “profile_name”.
The following table describes the selections.
Item | Options | Comments |
|
|
|
Profile Name | string | Value for Profile Name, 1 to 30 characters. |
|
|
|
Parameter Name | string | Value for Parameter Name, 1 to 30 characters. |
|
| Note: This entry must agree with the Parameters |
|
| Name in the Target Parameters table (see “Target |
|
| Parameters” on page |
|
|
|
Enabled | Enabled | Enables/disables this profile. |
| Disabled |
|
|
|
|
Storage | Volatile | Settings lost without power. |
| Settings remembered after reboot. | |
| Permanent | Settings can not be deleted. |
| Readonly | Settings can not be changed. |
| Other |
|
|
|
|
Broadmore 1750 - Release 4.6 |
|
