Configuration
UNI Version
UNI Version
The signaling options are UNI 3.1, UNI 4.0, Auto, and Off. Follow the sequence below and make the appropriate choice from the screen shown.
Select System Management ↵
Select Configuration ↵
Select System Services ↵
Select UNI Version ↵
NOTE: You must select the UNI Version before configuring any SVCs. If there are active SVCs, the UNI Version will not appear in the menu until you release all the SVCs. This is done to prevent interrupting service on those circuits.
The UNI Version selection screen appears as shown below with the current selection highlighted.
CAUTION! UNI VERSION SHOULD BE OFF WHENEVER THE NIMS
ARE NOT CONNECTED TO AN ATM SWITCH INTERFACE CONFIGURED FOR UNI SUPPORT.
Broadmore 1750 - Release 4.6 |
