Broadmore 1750 - Release 4.6 7-27
Configuration
NIM Redundancy
2. From the CAMMI main screen, follow the selection sequence above to display
the redundancy screen.
3. Following the instructions on the bottom of the screen and toggle through
available choices for each item.
4. Follow the sequence above to display the SONET screen below and make
choices to meet your specific configuration. Use the space bar to toggle
between reverting and non-reverting. The third choice, Single NIM, is used
when only one NIM is installed.
Select Maintenance/Diagnostics ↵
Select Redundancy ↵
Select APS Install ↵