Carrier Access 1750 Release CPU Control, Reboot Standby CPU, Install Single or Dual CPU

Configuration

CPU Redundancy

Release CPU Control

If desired, the online CPU can be made to release control (switch) to the standby CPU by performing the following steps. The online CPU will then become the standby CPU, and vice versa. This command may be used during maintenance procedures.

Select Maintenance/Diags ↵

Select Redundancy ↵

Select CPU ↵

Select Release CPU Control ↵

Reboot Standby CPU

If desired, the standby CPU can be rebooted by performing the following steps. This command may be used during maintenance procedures.

Select Maintenance/Diags ↵

Select Redundancy ↵

Select CPU ↵

Select Reboot Standby ↵

Install Single or Dual CPU

This configuration item only activates detection of the SNMP trap Standby CPU missing. If only one CPU is present, select Single CPU. If two CPUs are installed, select Dual CPU.

Select Maintenance/Diags ↵

Select Redundancy ↵

Select CPU ↵

Select Installed ↵

7-36 Broadmore 1750 - Release 4.6