C-2 Broadmore 1750 - Release 4.6
Software Error Messages
Overview
Overview
Error messages are displayed for a number of reasons. In many cases an error message
is the result of normal operation and no operator action is required. The messages
shown below are divided into two groups: SYSTEM ERRORS and SETUP ERRORS.
Typically, the SETUP ERRORS are configuration problems which the user can correct
through normal operations as noted in chapters three and four. SYSTEM ERRORS
provide clues about system operation which are meant primarily for Carrier Access
Customer Support analysis.
NOTE: System errors may be observed during normal operation. These
errors may be an indication of events which are not necessarily a problem.
Evaluate the Broadmore 1750 operation according to “Maintenance and
Troubleshooting” on page 8-1, when in doubt.
/*
* Error codes used primarily by the Configuration Manger.
*
* These codes are in a range not used by pSOS. For codes not in
this
* list, see the pSOS manual.
*/