12-40 Broadmore 1750 - Release 4.6
SNMP Configuration
Notify Filters

Notify Filters

Entries may be completely maintained using the cammi Notify Filters table (which is a
direct representation of "snmpNotifyFilterTable") or via a remote SNMP manager.
This table allows finer grained control over trap reports. Broadmore permits up to 20
entries in this table. An empty table is acceptable.
These settings can only be accessed and changed by a SuperUser.
Select System Management ↵
Select Configuration ↵
Select System Services ↵
Select SNMP Configure ↵
Select one of the following:
*
Edit
↵,
edit the Filter information
* Copy
↵,
(to put a copy of the information into the list)
* Delete
↵
, delete an existing Filter
* New
↵,
enter a new Filter
With each selection, confirm your changes and press Esc to exit.
Select Notify Filters ↵
* Validate Table
↵,
check table entries for consistency