SNMP Configuration
Notify Profiles
Notify Profiles
Entries may be completely maintained using the cammi Notification Profiles table (which is a direct representation of “snmpNotifyFilterProfileTable”) or via a remote SNMP manager. This table allows finer grained control over trap reports. Broadmore permits up to 20 entries in this table. An empty table is acceptable.
These settings can only be accessed and changed by a SuperUser.
Select System Management ↵
Select Configuration ↵
Select System Services ↵
Select SNMP Configure ↵
Select Notify Profiles ↵
Select one of the following:
*Edit ↵, edit the Profile information
*Copy ↵, (to put a copy of the information into the list)
*Delete ↵, delete an existing Profile
*New ↵, enter a new Profile
*Validate Table ↵, check table entries for consistency With each selection, confirm your changes and press Esc to exit.
Broadmore 1750 - Release 4.6 |
