Carrier Access 1750 user manual Bandwidth Meter

Configuration

General Properties

Bandwidth Meter

The Bandwidth meter allows you to track the amount of bandwidth in use. Follow the sequence below and make the appropriate choice from the screen shown.

Select System Management ↵

Select Configuration ↵

Select System Services ↵

Select General Properties ↵

Select Bandwidth Meter ↵

NOTE: The Bandwidth meter uses the clock rate of the HSSI NIM as the bus rate. If the HSSI NIM is set for received timing, the bandwidth meter will not be using the correct bus rate because the clock is supplied by the HSSI at the other end. Be sure to check how the HSSI's clock is set before using the Bandwidth meter.

7-22 Broadmore 1750 - Release 4.6