
Configuration
System Configuration
Set Power-on Default
Select Save Config. for PowerUp to save a particular configuration for system
Select System Management ↵
Select Configuration Files ↵
Select Save Config. For PowerUp ↵
Save Card Defaults
Select Save Card Defaults to save the default configuration for the specific card.
Select System Management ↵
Select Configuration Files ↵
Select Save Card Defaults ↵
Select Slot ↵
Select 'Yes' to save the defaults ↵
Restore Card Defaults
Select Restore Card Defaults to restore the default configuration for the specific card. This selection causes the following actions:
Deletes all existing connections
Reads the configuration file and restores the card port settings Reads the configuration file again and sets up any SVC/PVCs
Select System Management ↵
Select Configuration Files ↵
Select Restore Card Defaults ↵
Select Slot ↵
Select 'Yes' to restore the card defaults ↵
Broadmore 1750 - Release 4.6 |