SNMP Configuration
Target Parameters
Target Parameters
This selection allows you to enter the kind of protocol and security to be used for the target destinations. The screen below shows the New Target Parameters Entry.
Select System Management ↵
Select Configuration ↵
Select System Services ↵
Select SNMP Configure ↵
Select Target Params ↵
Select one of the following:
*Edit ↵, edit the Target Parameter information
*Copy ↵, (to put a copy of the information into the list)
*Delete ↵, delete an existing Target Parameter
*New ↵, enter a new Target Parameter
*Validate Table ↵, check table entries for consistency With each selection, confirm your changes and press Esc to exit.
Broadmore 1750 - Release 4.6 |
