SNMP Configuration
Communities
NOTE: Selecting the Validate command on this table will check each “User Name” value for existence in the “usmUserTable” and check each Tag Name for existence in the “snmpNotifyTable”.
NOTE: So that the Broadmore properly registers with the ATM Switch, the Broadmore automatically creates an “ILMI” community with predefined Views, Users, Groups, and Access. These properties are
ILMI (Interim Local Management Interface) is an independent industry standard used for configuration of ATM interfaces. Although it is based on SNMP, ILMI communication actually occurs using a transport other than IP that traverses only the physical ATM link. ILMI is essential to functions such as ATM
Use the Esc key to exit this menu. If you have made any changes to the Community information the system will ask you for confirmation on whether you want to accept the changes or not.
Broadmore 1750 - Release 4.6 |
|
