Carrier Access 1750 user manual Snmp Messages

Security Management

SNMP Messages

SNMP Messages

You can use the SNMP Properties selection to enable or disable SNMP messages. The Broadmore supports older SNMP v1 and v2, as well as newer SNMPv3 protocols. You have the option to disable only SNMPv1 and v2 messages, or all SNMP messages.

Only a SuperUser or SysAdmin can access or change these properties (see “SNMP Properties” on page 12-3).

Select System Management ↵

Select Configure ↵

Select System Services ↵

Select SNMP Configure ↵

Select SNMP Properties ↵

10-18 Broadmore 1750 - Release 4.6