Security Management
Logging In
Logging In
The following example uses the Windows telnet client software.
To log into the Broadmore:
1.Open a telnet window.
2.Type in the Hostname and Username. The Hostname is the IP address of the Broadmore, and the Username is admin.
3.Select Keyboard Interactive from the Primary
4.Click Connect.
NOTE: For initial system installation, the factory default user name is SYSADMIN and the password is INITIAL. To ensure network security, a network administrator (SuperUser) must create new user names and passwords. See “Managing Users and Audit Trails” on page
5.When Broadmore user login message displays, type the Login and Password. You will need to press Enter after each.
After successfully logging into the Broadmore user’s list, the Broadmore command prompt displays.
Broadmore 1750 - Release 4.6 |
