SNMP Configuration
Targets
The following table describes the selections.
Item | Options | Comments |
|
|
|
Target Name |
| A unique value for Target Name, 1 to 30 |
|
| characters. |
|
|
|
IP Address |
| Format xxx.xxx.xxx.xxx |
|
| where xxx is a decimal number, 0 to 255 |
|
|
|
Port |
| A number between 1024 and 65535. |
|
|
|
Parameter Name |
| A unique value for Parameter Name, 1 to 30 |
|
| characters. |
|
|
|
Trap Tag |
| A unique value for Trap Tag, 1 to 30 characters. |
|
|
|
Enabled | Enabled | Enables/disables this target. |
| Disabled |
|
|
|
|
Storage | Volatile | Settings lost without power. |
| Settings can be changed. | |
| Permanent | Settings can not be deleted. |
| Readonly | Settings can not be changed. |
| Other |
|
|
|
|
Timeout (secs*100) |
| Enter Timeout as a value in hundredths of a |
|
| second. For example, 1500 represents 15 seconds. |
|
| This value indicates the expected maximum round |
|
| trip time for communicating with the IP address |
|
| defined by this target. When a message is sent to |
|
| this address, and a response (if one is expected) is |
|
| not received within this time period, it may |
|
| assumed that the response will not be delivered. |
|
|
|
Retries |
| The number of times to attempt sending the |
|
| notification. |
|
|
|
Max Message Size |
| TBD |
|
|
|
| Broadmore 1750 - Release 4.6 |
