2-958
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show qos statistics
show qos statistics To display the various QoS-related counters for a specified port, use the show qos statistics command.
show qos statistics {mod[/port]}
show qos statistics l3stats
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines In the show qos statistics output, the Threshold #:Packets dropped field lists each threshold and the
number of packets dropped. For example, 1:0 pkt, 2:0 pkts indica tes tha t t hr eshol d 1 a nd thr esh old 2
dropped 0 packets.
Examples This example shows how to display the QoS statistics for module 8, port 1:
Console> show qos statistics 8/1
Tx port type of port 8/1 :1p2q2t
Q3T1 statistics are included in Q2T2.
Q # Threshold #:Packets dropped
--- -----------------------------------------------
1 1:0 pkts, 2:0 pkts
2 1:0 pkts, 2:0 pkts
Rx port type of port 8/1 :1q2t
Q # Threshold #:Packets dropped
--- -----------------------------------------------
1 1:0 pkts, 2:0 pkts
Console>
This example shows how to display the QoS Layer 3 statistics:
Console> (enable) show qos statistics l3stats
Warning: QoS is disabled.
QoS Layer 3 Statistics show statistics since last read.
Packets dropped due to policing: 0
IP packets with ToS changed: 0
IP packets with CoS changed: 26
Non-IP packets with CoS changed: 0
Console> (enable)
mod/port Number of the module and, optionally, the number of the port on the module.
l3stats Displays Layer 3 statistics information.