2-301
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set ip redirect
set ip redirect
To enable or disable ICMP redirect messages on the Catalyst 6500 series switches, use the set ip
redirect command.
set ip redirect {enable | disable}
Syntax Description
Defaults The default configuration is ICMP redirect is enabled.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to deactivate ICMP redirect messages:
Console> (enable) set ip redirect disable
ICMP redirect messages disabled.
Console> (enable)
Related Commands show ip route
show netstat
enable Permits ICMP redirect messages to be returned to the source host.
disable Prevents ICMP redirect messages from being returned to the source host.