2-1038
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show spantree portfast
show spantree portfast
To display PortFast information, use the show spantree portfast command.
show spantree portfast [mod/port]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines When you enter the show spantree portfast command, if the designation for a port is displayed as an
edge port, it is a PortFast port. Refer to Chapter 8, “Configuring Spanning Tree,” and Chapter 9,
“Configuring Spanning Tree PortFast, UplinkFast, BackboneFast, and Loop Guard,” of the Catalyst
6500 Series Switch Software Configuration Guide for more information about PortFast.
Examples This example shows how to display PortFast information:
Console> show spantree portfast
Portfast BPDU guard is disabled.
Portfast BPDU filter is disabled.
Console>
This example shows how to display PortFast information for a specific module and port:
Console> show spantree portfast 3/1
Portfast: Default
BPDU Filter: Enable
BPDU Guard: Default
Portfast BPDU guard is disabled.
Portfast BPDU filter is disabled.
Console>
Related Commands set spantree portfast
set spantree portfast bpdu-filter
set spantree portfast bpdu-guard
mod/port (Optional) Number of the module and the port on the module.